54" NatureWalk Interior

Recyclable polyester textile backed with repostionable, removable adhesive. Dimensionally stble and tear resitant, NaturWalk is an ideal environmental choice for a wide variety of applications. The naturally non-skid face film is a great one-stepsolution for floor graphics or any project where atextured film is desired.

APPLICATIONS (examples):

• Wall and Door Murals
• Museum Exhibits
• Floor Graphics
• Trade Shows

ADVANTAGES:

• Leaves No or Almost No Adhesive Residue
• Polyester Film Is Recyclable Where Allowed
• Easy To Apply and Remove
• Print and Go - No Lamination Needed!

MATERIAL

• Face- 100% Polyester Fabric with aMatte Finish
• Back Side - Grey Adhesive
• Adhesive -Removable Grey Solvent Acrylic (30µ)
• Liner - DPE Coated Paper - 5 mil (133µ +/- 9µ)
• Film Thickness - 4.5 mil (115μ +/- 10μ)
• FR Certification - ASTM E84, M1, B1
• Slip Resistance - ANSI A137.1/A326.3, R10
• Size - 54" x 100'

PRINTING METHOD

• Digital- Solvent, Eco-Solvent, UV & Latex
• Screen Print

DURABILITY

• Interior - Vertical Surfaces - Up to 10 yearsFlooring Surfaces - Up to 6 Months, Dependent on Traffic
• Environment - Humidity & Solvent Resistance – Good
• Shelf Life - 1 Year
• Storage Requirements - Store at 59°F to 75°F (+ 15°C to +24°C) and Relative Humidity Between 40% and 65%
• Repositionable - Yes

APPLICATION/REMOVAL

• Application Temp - Minimum +50°F (+10°C)
• Service Temp - +0°F to +122°F (-17°C to +50°C)
• Removal Temp - +50°F (+10°C) or Greater

Surface must be clean and dry. Prevent contact with solvent or ammoniabased cleaners. For best results, clean installation surface with a mild 
detergent and water and dry thoroughly. ALWAYS clean and dry glass 
surface prior to application. 
*For critical substrates and all surfaces, please test PRIOR to application.