54" X-Treme White Printable Vinyl

A smooth, white vinyl film backed with a proprietary removable adhesive.

The adhesive is specially-formulated for installation in extreme temperature conditions.

Well-suited for low-surface energy substrates.

APPLICATIONS (examples):

• Flat and slightly structured surfaces
• Low-surface energy structures
• Truck sides & trailers
• glass, wood, metal & concrete
• Packaging

ADVANTAGES:

• Excellent temperature resistance and dimensional stability
• Application in extreme cold and heat
• Ideal for low-surface energy substrates
• Great for packaging applications for products subjected to temperature swings

MATERIAL

• Face Film: Printable White Smooth PVC
• Back Side: White
• Adhesive: Proprietary Removable, Semi-Permanent
• Liner: Siliconized Paper Liner –
  5 mil (130μ +/-10μ)
• Film Thickness 4 mil (100μ +/-10μ)
• FR Certification B1, DIN EN 45455-2

PRINTING METHOD

• Digital- Solvent, Eco-Solvent, UV & Latex
• Screen Print
• Offset

DURABILITY

• Interior Up to 5 Years
• Exterior Up to 5 Years Vertical Exposure under
  Normal Conditions
• Environment Humidity & Solvent Resistance –
  Very Good
• Shelf Life 1 Year
• Storage Requirements
  Stored at 59°F to 77°F (+15°C to +25°C)
  with a Relative Humidity between
  45% to 70%
• Repositionable Yes – During Initial Installation

APPLICATION/REMOVAL

• Application Temp On Trailers
  +5°F to +122°F (-15°C to +50°C)
  +50° to +122°F (+10°C to +122°C)
• Service Temp -13°F to +158°F (-25°C to +70°C)
• Removability Clean Removal with No Adhesive
  Residue, up to 6 Months - Adhesion
  May Increase over Time
• Removal Temp +50°F (+10°C) or Greater
• Exclusions NOT to Be Applied to Fresh Paint or Ink,
  Polycarbonate, and Some PVC
  (No Exhaustive List Available)

Surface must be clean and dry. Prevent contact with solvent or ammoniabased
cleaners. For best results, clean surfaces with a mild detergent and
water and dry thoroughly. Always clean and dry glass prior to application.
For full installation and removal recommendations, please refer to
“X-Treme Application & Removal Recommendations.”

*For critical substrates and all surfaces, please test PRIOR to application.